型號：BLD   用途：材料拉彎實驗  ：萬能試驗機 電子拉力機  拉力機                                                              

                                                           抗彎強度試驗機該系列試驗機符合國家標準，結構為：?jiǎn)沃?雙柱，類型為

：液晶顯示+微機控制，zui大試驗力:0-300KN,可根據客戶需求訂制。
抗彎強度試驗機的詳細介紹抗彎強度試驗機       
微機控制萬能拉力試驗機    型號：BLD
一、抗彎強度試驗機 性能特點：
微機控制電子萬能試驗機、采用*設計理念，外形美觀、操作方便、性能穩定可靠。計算機通過我公司研制的全數字控制系統進行采集

控制、經全數字調速控制器直接控制全數字調速電機轉動、電機轉速經圓弧同步減速系統減速后傳遞給精密滾珠絲杠副實現橫梁上升、下降，

完成試樣的拉伸、剝離、壓縮等力學性能試驗。
試驗機專業軟件實現自動求取定伸長率、定力伸長、抗拉強度、試樣延伸率、上、下屈服及屈服強度等數據，還可滿足位移保持控制。計算機

控制系統對試驗過程的控制和數據處理符合相應金屬、非金屬及復合材料國家標準的要求、試驗報告多樣化如WORD、EXECEL等方式。
本機無污染、噪音低，效率高，具有較寬的調速范圍。本機適用于各種金屬、非金屬及復合材料的力學性能指標的測試，*符合國家相關標

準的要求。
該機廣泛應用于建筑建材、航空航天、機械制造、電線電纜、橡膠塑料、紡織、家電等行業的材料檢驗分析，是科研院校、大專院校、工礦企

業、技術監督、商檢仲裁等部門的理想測試設備。
 
二、抗彎強度試驗機 主要技術指標
1、zui大試驗力：0—300KN
2、試驗力分檔：全程不分檔，全程分辨率不變
3、試驗力顯示范圍:0～300KN
4、試驗力有效測量范圍：滿量程的2%～100%
5、試驗力測量精度：優于示值的±1%
6、位移速度控制范圍：0.05mm/min～500mm/min，無級調速，速度任意設定
7、位移分辨率：0.01mm
8、位移速度控制精度：優于±0.5%
9、位移測量準確度：優于±0.5%
10、拉伸行程：0～1000mm（不含附具）
11、軟件及用戶界面：WINDOWSXP操作環境下的軟件和交互式人機對話操作界面
12、供電電源：220V，50Hz
 
 
四、抗彎強度試驗機功能介紹
1）自動停機：試樣破壞后，移動橫梁自動停止移動（或自動返回初始位置）
2）自動換檔：根據試驗力大小自動切換到適當?shù)牧砍蹋源_保測量數據的準確性
3）條件模塊：試驗條件和試樣原始數據可以建立自己的標準模塊的形式存儲；方便用戶的調用和查看，節省試驗時間
4）自動變速：試驗過程的位移速度可自動完成也可手動改變
5）6）自動保存：試驗結束，試驗數據和曲線計算機自動保存，杜絕因忘記存盤而引起的數據丟失
7）測試過程：試驗過程及測量、顯示、分析等均由微機完成
8）批量試驗：對相同參數的試樣，一次設定后可順次完成一批試驗
9）試驗軟件：中文Windows用戶界面，操作簡便
10）顯示方式：數據與曲線隨試驗過程動態顯示
11）曲線遍歷：試驗完成后，可對曲線進行放大再分析，用鼠標查到試驗曲線上各點對應的數據
12）試驗報告：可根據用戶要求進行編輯打印
13）限位保護：具有程控和機械兩級限位保護
14）過載保護：當負荷超過額定值3～5%時，自動停機
15）自動和人工兩種模式求取各種試驗結果，自動形成報表，使數據分析過程變的簡單，便于用戶
 
 
該系列試驗機符合國家標準，結構為：?jiǎn)沃?雙柱，類型為：液晶顯示+微機控制，zui大試驗力:0-300KN,可根據客戶需求訂制。

Model: BLD uses: material bending experiment: universal testing machine electronic tensile machine bending strength test

machine, the test series in line with national standards, structure: single column + double column, type: liquid crystal

display, microcomputer control, maximum force of the test: 0-300KN, can be customized according to customer demand.
Flexural strength testing machine details flexural strength testing machine
Microcomputer controlled universal tensile testing machine model: BLD
One, flexural strength testing machine performance and characteristics:
Microcomputer control electronic universal testing machine, the use of foreign advanced design concepts, beautiful

appearance, convenient operation, stable and reliable performance. I developed the company's computer through the digital

control system for acquisition and control, the full digital speed controller in direct control of full digital speed

regulating motor, motor speed by the arc of synchronous reduction system slowdown is transferred to the precision ball screw

to realize beam rise, fall, complete peeling, tensile, compression mechanical properties test.
Testing machine of professional software for automatic calculating fixed elongation, tensile strength, elongation, each

sample extension rate, yield and yield strength data, but also can satisfy the displacement control. Computer control system

of test process control and data processing with the corresponding metal, non-metallic composite materials and the

requirements of national standards, such as WORD, EXECEL test report diversification etc..
This machine has no pollution, low noise, high efficiency, wide speed range. This machine is suitable for various metals,

non-metallic and the mechanical properties of the composite index testing, in full compliance with the relevant national

standards.
This machine is widely used in building materials, aerospace, machinery manufacturing, wire and cable, rubber, plastics,

textile, home appliances and other industries material test and analysis, is a scientific research institutions,

universities, industrial and mining enterprises, and technical supervision, arbitration and other departments of the ideal

testing equipment.
In two, the flexural strength testing machine main technical parameters
In 1, the maximum test load: 0 - 300KN
2, test grading: full not classified, full resolution constant
In 3, the test force display range: 0～ 300KN
In 4, the test force of the effective range of measurement: the full range of 2%～ 100%
In 5, the test force measuring accuracy is better than± 1%: indication
In 6, the displacement speed control range: 0.05mm/min ~ 500mm/min, stepless speed regulation, speed arbitrarily set
In 7, the displacement resolution: 0.01mm
In 8, the displacement speed control precision is ± 0.5%:
In 9, the displacement measurement accuracy of ± 0.5%:
In 10, the drawing stroke: 0～ 1000mm （ not including the attached ）
In 11, software and user interface: WINDOWSXP operating environment of the software and interactive man-machine interface

dialogue
12, power: 220V, 50Hz
In four, the flexural strength test machine function introduction
1） automatic shutdown: failure, automatically stops moving beams （ or automatically returns to the original position ）
2） automatic transmission: according to the test force size automatically switch to the appropriate range, to ensure the

accuracy of measurement data
3） the condition module: test conditions and sample data can build their own standard module is stored in the form of; is

convenient for the user to call and see, save test time
4） automatic transmission: test process displacement velocity can be done automatically and manually change
5） 6） automatically save: end of test, test data and curve computer automatically saved, eliminated due to forget the disk

caused by data loss
7） test: Test and measurement, display, analysis by computer
8）: for the same batch test parameters of the sample, a set can be sequentially performed a number of experiments
9） test software: Chinese Windows user interface, easy operation
10） display mode: data and curves with the test process of dynamic display
11） curve traversal: after completion of the test, the curve is amplified and analysis, using the mouse to check test of each

point on the curve corresponding to the data
12） test report: according to user requirements for editing and printing
13） limit protection: a programmable and mechanical two level limit protection
14） overload protection: when the load exceeds the rated value from 3 to 5%, automatic shutdown
15） automatic and manual two kinds of patterns for various test results, automatic formation of statements, the data analysis

process becomes simple, convenient user
The series of test machine in line with national standards, structure: single column + double column, type: liquid crystal

display, microcomputer control, maximum force of the test: 0-300KN, can be customized according to customer demand.